Security CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
559
19.17
security add trigger netmeeting
19.17.1 Syntax
security add trigger <name> netmeeting
19.17.2 Description
This command allows you to use the example trigger provided by the CLI. It
allows you to add a trigger to allow Netmeeting to transport data through the
security package. This application opens a secondary port session. You do
not have to set the port range or maxactinterval for a Netmeeting trigger – the
CLI automatically sets this for you.
19.17.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
An arbitrary name that identifies the
trigger. It can be made up of one or
more letters or a combination of letters
and digits, but it cannot start with a
digit.
N/A
19.17.4 Example
-->
security add trigger t2 netmeeting
