Security CLI Commands
546
2/1553-ZAT 759 94 Uen B – December 2005
19.6 security
set
blockinglog|intrusionlog|sessionlog level
19.6.1 Syntax
security set {blockinglog|intrusionlog|sessionlog}
<level>
19.6.2 Description
This command sets the minimum level of logging that is reported. The levels
available in this command correspond to syslog levels.
19.6.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
blockinglog
Configures blocking logging.
N/A
intrusionlog
Configures intrusion logging.
N/A
sessionlog
Configures session event logging.
N/A
level
The level of logging reported at the
event log or the console. You can
choose from the following levels:
emergency, alert, critical, error,
warning, notice, informational, debug
.
These levels directly correspond to
syslog
levels.
notice
19.6.4 Example
-->
security enable blockinglog warning
