Firewall CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
227
10.5
firewall list policies
10.5.1 Syntax
firewall list policies
10.5.2 Description
This command lists the following information about policies:
•
Policy ID number.
•
Policy
name.
•
Interface Type 1 and Interface Type 2 – the two interface types between a
policy exists (external – internal, external – dmz or internal – dmz).
•
Validator Allow Only status – False, only traffic based on the direction and
the IP address(es) specified by Firewall validators is blocked. All other
traffic is allowed.
10.5.3 Example
-->
firewall list policies
Firewall Policies:
ID | Name | Type 1 | Type 2 | Validator Allow Only
-------------------------------------------------------------------
1 | ext-int | external | internal | false
2 | ext-dmz | external | dmz | false
3 | dmz-int | dmz | internal | false
-------------------------------------------------------------------