DHCP Server CLI Commands
162
2/1553-ZAT 759 94 Uen B – December 2005
6.13 dhcpserver
forcerenew
6.13.1 Syntax
dhcpserver forcerenew <ipaddress>
6.13.2 Description
This command prompts the DHCP server to issue a DHCPFORCERENEW
message to the DHCP client at the given IP address.
Note that the server will only do this if the DHCP client is on one of the
subnets the DHCP server has been configured to serve. The client must also
be configured to accept DHCPFORCERENEW messages using the
dhcpclient set interfaceconfig forcerenew enabled
command.
6.13.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
ipaddress
The IP address that the DHCP
server issues the
DHCPFORCERENEW message to.
N/A
6.13.4 Example
-->
dhcpserver forcerenew 192.168.1.1