Model 4200A-SCS Parameter Analyzer Reference Manual
Section 6: Clarius
4200A-901-01 Rev. C / February 2017
6-321
wlrlib user library
The user modules in the
wlrlib
user library run linear regression and charge-to-breakdown (Q
BD
)
ramp tests for wafer-level reliability (WLR) testing. These user modules are summarized in the table
below.
wlrlib user modules
User module
Description
llsq1
Performs simple linear regression.
qbd_rmpv
Performs a charge-to-breakdown test using the
QBD V-ramp test.
qbd_rmpj
Performs a charge-to-breakdown test using the
QBD J-ramp test.
For more information, refer to
Wafer-Level Reliability Testing
(on page L-1).
Winulib user library
The
Winulib
user library provdes user interface routines for operator inputs and prompts, such as
abort, retry, and ignore decision prompts.
Winulib user modules
User Module
Clarius Action Name
Description
(on page 6-322)
abortretryignoredialog
This user module creates a dialog box with
Abort, Retry, and Ignore decision prompts.
page 6-323)
inputokcanceldialog
This user module creates a dialog box that
can prompt for up to four input parameters.
page 6-325)
okcanceldialog
This user module creates a dialog box that
provides OK or Cancel decisions.
(on page 6-
okdialog
This user module creates a dialog box that
pauses the test sequence to make an
announcement (for example, "Test
finished") or prompt for an action (for
example, connection change).
page 6-328)
retrycanceldialog
This user module creates a dialog box that
presents Retry or Cancel decisions.
page 6-329)
yesnocanceldialog
This user module creates a dialog box that
contains up to four lines of text and Yes,
No, or Cancel decisions.
(on page 6-
yesnodialog
This user module creates a dialog box that
contains up to four lines of text and Yes
and No buttons.
