Remote Control Commands
R&S
®
SMA100B
478
User Manual 1178.3834.02 ─ 03
:SYSTem:RESTart
Restarts the instrument without restarting the operating system.
Usage:
Event
:SYSTem:SHUTdown
Shuts down the instrument.
Usage:
Event
:SYSTem:WAIT
<TimeMs>
Delays the execution of the subsequent remote command by the specified time.
This function is useful, for example to execute an SCPI sequence automatically but
with a defined time delay between some commands.
See
Chapter 10.2.3, "Assigning Actions to the User Key"
Setting parameters:
<TimeMs>
integer
Wait time in ms
Range:
0 to 10000
*RST:
0
Example:
:SYSTem:WAIT 10000
// waits 10s before resetting the instrument
*RST
Usage:
Setting only
Manual operation:
See
12.17 STATus Subsystem
This system contains the commands for the status reporting system. See also
ter A.1.5, "Status Reporting System"
on page 520 for detailed information.
on page 309 has no effect on the status registers.
Value ranges
●
Queries return the current value of the respective register, which permits a check of
the device status.
Return values: A decimal value in the range 0 to 32767 (=2
15
-1)
●
The configuration commands set the respective register thus determining which
status changes of the R&S
SMA100B cause the status registers to be changed.
Setting values: A decimal value in the range 0 to 32767 (=2
15
-1)
STATus Subsystem
