Remote Control Commands
R&S
®
SMA100B
392
User Manual 1178.3834.02 ─ 03
Parameters:
<Filename>
string
Filename or complete file path; file extension can be omitted.
Example:
See
Example "Create a table with user-defined correction values
Manual operation:
See
[:SOURce<hw>]:CORRection:VALue?
Queries the current value for user correction.
Return values:
<Value>
float
Range:
-100 to 100
Increment: 0.01
*RST:
0
Example:
See
Example "Create a table with user-defined correction values
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:CORRection:ZERoing:STATe
<State>
Activates the zeroing procedure before filling the user correction data acquired by a
sensor.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
1
Example:
See
Example "Fill user correction data with sensor"
Manual operation:
See
" Fill User Correction Data with Sensor"
[:SOURce<hw>]:CORRection:CSET:DATA[:SENSor<ch>][:POWer]:SONCe
Fills the selected user correction list with the level values measured by the power sen-
sor for the given frequencies.
Suffix:
SENSor<ch>
.
Defines the used power sensor, i.e. the sensor whose values
are used.
Example:
See
Example "Fill user correction data with sensor"
Usage:
Event
SOURce Subsystem
