UMN:CLI
User Manual
V8102
188
ethernet oam default-meg de-
fault mhf-creation default
Creates a default MEG with MHF.
ethernet oam default-meg de-
fault mhf-creation explicit
Creates a default MEG with MHF only if there is a MEP
at the next lower level.
ethernet oam default-meg de-
fault mhf-creation none
Creates a default MEG without MHF.
To delete a configured MHF, use the following command.
Command
Mode
Description
no ethernet oam default-meg
default
{
mhf-creation
|
level
}
Global
Deletes a default MEG, its level, and MHF.
A MEG should have a unique name across entire networks. Several MEGs can have
same level. But one single MEG cannot have serveral levels.
7.7.2.4
Creating RMEP
To select the static or dynamic method for creating a remote MEP, use the following
command.
Command
Mode
Description
ethernet
oam
rmep-creation
{
static
|
dynamic
}
Global
Selects the method to create a remote MEP.
no ethernet oam rmep-creation
Deletes the configured remote MEP creation method.
To specify a remote MEP ID in the static method, use the following command.
Command
Mode
Description
ethernet oam rmep rmepid
<1-
8191>
meg
NAME
Interface
[XE/GE/CG]
Configures a remote MEP ID on the port of specific
MEG.
no ethernet oam rmep rmepid
<1-8191>
meg
NAME
Deletes the configured remote MEP.
7.7.3
Enabling Y.1731 Entity
To enable ITU-T Y.1731 function for MEPs, use the following command.
Command
Mode
Description
ethernet oam mep enable meg
NAME
[
mepid
<1-8191>]
Global
Enables Y.1731 OAM for MEPs.
NAME: MEG
’s name
To disable ITU-T Y.1731 function for MEPs, use the following command.
ii