UMN:CLI
User Manual
V8102
860
13.7.2.3
VoIP Application Service
The configuration of VoIP application service defines the attributes of calling features
used in conjunction with a VoIP line service, such as CID, call waiting, call transfer, call
presentation, direct connect, and etc.
To configure the CID features, use the following command.
Command
Mode
Description
caller-id
{
call-number
|
call-
name
|
cid-blocking
|
cid-
number
|
cid-name
|
acr
}
VoIP-SIP
Enables each feature for caller ID. (default: disabled)
call-number: calling number
call-name: calling name
cid-blocking: CID blocking (both number and name)
cid-number: permanent presentation status for number
cid-name: permanent presentation status for name
acr: anonymous CID blocking. It may not be possible to
support this feature in the ONT.
no caller-id
Disables all the features for caller ID.
To configure the call waiting features, use the following command.
Command
Mode
Description
call-waiting
{
call-wait
|
cid-
announce
}
VoIP-SIP
Enables each feature for call waiting. (default: disa-
bled)
call-wait: call waiting
cid-announce: caller ID announcement
no call-waiting
Disables the call waiting feature.
To configure the call processing (transfer) features, use the following command.
Command
Mode
Description
call-progress-transfer
{
3way
|
call-transfer
|
call-hold
|
call-
park
|
not-disturb
|
flash-emerg-
call
|
emerg-originating-hold
|
6way
}
VoIP-SIP
Enables each feature for call processing. (default: dis-
abled)
3way: 3way call
call-transfer: call transfer
call-hold: call hold
call-park: call park
not-disturb: do not disturb
flash-emerg-call: flash on emergency service call (flash
is to be processed during an emergency service call)
emerg-originating-hold: emergency service originating
hold (determines whether call clearing is to be per-
formed on on-hook during an emergency service call)
6way: 6way call
no call-progress-transfer
Disables all the features for call processing.
