UMN:CLI
User Manual
V8102
862
To configure VoIP feature access codes, use the following command.
Command
Mode
Description
feature cancel-call-wait VALUE
VoIP-SIP
Specifies the access code for each feature.
VALUE: a string of characters from the set
(0..9, *, #) with trailing nulls in any unused
bytes
feature call-hold VALUE
feature call-park VALUE
feature caller-id-act VALUE
feature caller-id-deact VALUE
feature do-not-disturb-act VALUE
feature do-not-disturb-deact VALUE
feature do-not-disturb-pin-change VALUE
feature emerg-service-number VALUE
feature intercom-service VALUE
no feature cancel-call-wait
Deletes the specified access code for each
feature.
no feature call-hold
no feature call-park
no feature caller-id-act
no feature caller-id-deact
no feature do-not-disturb-act
no feature do-not-disturb-deact
no feature do-not-disturb-pin-change
no feature emerg-service-number
no feature intercom-service
13.7.2.5
SIP User Data
The configuration of SIP user data defines the user-specific attributes associated with a
specific VoIP CTP.
To specify an SIP voicemail server, use the following command.
Command
Mode
Description
voicemail-server-uri ADDRESS
VoIP-SIP
Configures IP address or URI of SIP voicemail server.
ADDRESS: voicemail server IP address or URI
To specify the voicemail subscription expiration time, use the following command.
Command
Mode
Description
voicemail-subscript-expire-time
VALUE
VoIP-SIP
Defines the voicemail subscription expiration time. If
this value is 0, the SIP agent uses an implementation-
specific value. (unit: second, default: 3600)
