User Manual
UMN:CLI
V8102
735
Basic Operation
•
Configure OLT and ONU (ONT) in
GPON Interface Configuration
mode.
•
For common ONU (ONT) configuration, create a profile in
ONU Profile Configuration
mode.
•
If the created profile is modified, the profile will be applied to the ONUs (ONTs) auto-
matically.
Specifying OLT ID and ONU ID
When specifying an OLT ID in the CLI, you can simply put the number in the form of
SLOT
/
PORT
such as
1/1
,
1/2
,
1/3
,
1/4, 1/5,
…
2/15
,
2/16
. Multiple input is also possible,
e.g.
2/1, 2/2, 2/3
or
2/1-2/4
.
When specifying an ONU ID, just remember that the ONU ID is always between 0 and
127 or ONU serial number. Multiple input for the ONU ID is the same as the ONU ID, e.g.
1-3
,
8-22, DSNWcb00282d
.
CLI Structure
To configure GPON functionalities, enter the
interface gpon OLT-ID
command in
Global
Configuration
mode. The
GPON Interface Configuration
mode is a stage of preparation
for the detail PON configuration.
To open
GPON Interface
mode, use the following command.
Command
Mode
Description
interface gpon OLT-ID
Global
Opens
GPON Interface
mode.