UMN:CLI
User Manual
V8102
746
To display the configured maximum number of ONUs, use the following command.
Command
Mode
Description
show
olt
max-onu-count
[
gpon OLT-ID
]
Enable/Global
Shows the configured maximum number of
ONUs.
show olt max-onu-count
Interface
[GPON]
13.1.13
OLT Anti-Spoofing
When the V8102 learns the same MAC address from the two (or more) different ONUs on
the same GPON, the system regards the latest ONU(s) as the fault operation, and make
the ONU(s) block the inflow of sub-level MAC by MAC filtering. Through this anti-spoofing,
the V8102 can prevent the malicious spoofing attack.
To enable/disable the OLT anti-spoofing, use the following command.
Command
Mode
Description
olt anti-spoofing enable
[
expire-
timeout
<60-65535>]
Interface
[GPON]
Enables the OLT anti-spoofing.
60-65535: expire timeout (= MAC filtering operation
time). After the configured expiration, the OLT system
can learn again the MAC regarded as a fault.
olt anti-spoofing disable
Disables the OLT anti-spoofing.
To clear MAC filtering due to the anti-spoofing operation, use the following command.
Command
Mode
Description
clear olt anti-spoofing
Interface
[GPON]
Clears MAC filtering being operated currently occurred
by anti-spoofing function.
ONU-ID: ONU ID (1-128) or serial number
MAC: MAC address
VID: VID
clear olt anti-spoofing ONU-ID
[
MAC VID
]
To display the user configuration of the OLT anti-spoofing, use the following command.
Command
Mode
Description
show olt anti-spoofing
[
gpon OLT-ID
]
Enable/Global
Shows the user configuration of the OLT anti-
spoofing.
show olt anti-spoofing
Interface
[GPON]
To display the current OLT anti-spoofing status, use the following command.
Command
Mode
Description
show olt anti-spoofing status gpon
OLT-ID
Enable
Global
Shows the current anti-spoofing MAC filtering
status per ONU, MAC and VID.
show olt anti-spoofing status
Interface
[GPON]