User Manual
UMN:CLI
V8102
765
To display a description of an ONU, use the following command.
Command
Mode
Description
show onu description gpon OLT-
ID
Enable/Global
Shows the ONU
’s description.
show onu description
[
ONU-ID
]
Interface
[GPON]
13.2.1.8
ONU Connectivity via Ping Test
To verify the network connectivity with the ONU, use the following command.
Command
Mode
Description
omci ping ONU-ID
Interface
[GPON]
Shows the network connectivity between OLT ID and
ONU ID.
ONU ID (1 to 128) or ONU serial number
13.2.2
Assigning IP address
To configure the IP host service ID, IP address and gateway address for an ONU, use the
following command.
Command
Mode
Description
onu static-ip ONU-ID ip-host
SERVICE-ID
A.B.C.D/M
gw
A.B.C.D
Interface
[GPON]
Configures the IP host service ID, IP address and
gateway address for an ONU.
ONU-ID: ONU ID (1 to 128) or ONU serial number
SERVICE-ID: IP host service ID
A.B.C.D/M: IP address
A.B.C.D: IP gateway address
no onu static-ip ONU-ID ip-host
SERVICE-ID
Deletes the configured IP host service ID, IP address
and gateway address for the ONU.
To assign a static IPv6 address for IPv6 host of ONU, use the following command.
Command
Mode
Description
onu static-ip ONU-ID ipv6-host
SERVICE-ID X:X::X:X/M default-
router X:X::X:X
Interface
[GPON]
Configures the IPv6 host service ID, IPv6 address and
IPv6 gateway address for an ONU.
ONU-ID: ONU ID (1 to 128) or ONU serial number
SERVICE-ID: IPv6 host service ID
X:X::X:X/M: IPv6 address
X:X::X:X: IPv6 address of default router
no onu static-ip ONU-ID ipv6-
host SERVICE-ID
Deletes the configured static IPv6 address of IPv6
host.
For the details of how to create and configure the IP host service, see
. The IP assignment on IP host service configuration has to be speci-
fied as
“
static
” when assigning IP address to ONU.