UMN:CLI
User Manual
V8102
694
To configure the default route with an option, use the following command.
Command
Mode
Description
default-information originate metric
<0-16777214>
Router
Configures the default route with one
option.
default-information originate metric-type
{
1
|
2
}
default-information originate always
default-information originate route-map
MAP-
NAME
To delete the configuration, use the following command.
Command
Mode
Description
no default-information originate
Router
Deletes the configuration.
no
default-information
originate
metric
<0-
16777214>
no default-information originate metric-type
{
1
|
2
}
no default-information originate always
no default-information originate route-map
MAP-
NAME
12.3.10
External Routes to OSPFv3 Network
If other routing protocols redistribute into OSPFv3 network, these routes become OSPFv3
external routes. Other routing protocols are static route, connected route, kernel route
that are external route. Those routing information can distribute into OSPFv3 network.
There are 3 kinds of additional configuration about external routes to OSPFv3 network.
metric
is configures Metric value of the default route,
metric-type
is for type of finding
the path.
metric-type 1
uses internal path-cost with external path-cost as a cost, metric
type 2 always uses external cost value.
route-map
is transmission of specific routing in-
formation to assigned route which has MAP-NAME.
Those 3 kinds of additional configuration can be selected more than 2 options without or-
der, and it applies to consistent across all external routes in an attached network.
The following is explaining 3 options of command:
•
metric
<0-16777214>
•
metric-type
<1-2>
•
route-map
MAP-NAME
To configure the external route transmission, use the following command.
Command
Mode
Description
redistribute
{
kernel
|
connected
|
static
|
bgp
}
Router
Advertises the external route (connected, kernel, static)
into OSPFv3.
redistribute
{
kernel
|
connected
Specifies redistributing routes from other protocols into
