User Manual
UMN:CLI
V8102
69
To display a current login banner, use the following command.
Command
Mode
Description
show banner
Enable
Global
Shows a current login banner.
4.1.3.6
Setting Auto Log-out Time
For security reasons of the V8102, if no command is entered within the configured inactiv-
ity time, the user is automatically logged out of the system. Administrator can configure
the inactivity timer. To enable auto log-out function, use the following command.
Command
Mode
Description
exec-timeout
<1-35791> [<0-59>]
Global
Enables auto log-out function for its current session.
1-35791: time unit in minutes (by default 10 minutes)
0-59: time unit in seconds
exec-timeout 0
Disables auto log-out.
To display a configuration of auto-logout function, use the following command.
Command
Mode
Description
show exec-timeout
Enable
Global
Shows a configuration of auto-logout function.
4.1.3.7
Security Level
For the V8102, it is possible to configure the security level from 0 to 15 for a system ac-
count. The level 15, as the highest level, has a read-write authority. The administrator can
configure from level 0 to level 14. The administrator decides which level user uses which
commands in which level. As the basic right from level 0 to level 14, it is possible to use
exit
and
help
command in
Privileged EXEC View
mode and it is not possible to access to
Privileged EXEC Enable
mode.
To define the security level and its authority, use the following command.
Command
Mode
Description
privilege view
level
<0-15> {
COMMAND
|
all
}
Global
Uses the specific command of
Privileged
EXEC View
mode in the level.
privilege enable level
<0-15> {
COMMAND
|
all
}
Uses the specific command of
Privileged
EXEC Enable
mode in the level.
privilege configure level
<0-15> {
COMMAND
|
all
}
Uses the specific command of
Global Con-
figuration
mode in the level.
privilege dhcp-option-format level
<0-15>
{
COMMAND
|
all
}
Uses the specific command of
DHCP option
format Configuration
mode in the level.
privilege dhcp6-option-format level
<0-15>
{
COMMAND
|
all
}
Uses the specific command of
DHCP6 op-
tion format Configuration
mode in the level.
privilege dhcp6-pool level
<0-15> {
COM-
MAND
|
all
}
Uses the specific command of
DHCP Pool
Configuration
mode in the level.
