UMN:CLI
User Manual
V8102
88
Step 3
Register new IU in the slot.
Command
Mode
Description
slot planning iu SLOT_NUMBER
{
siu-gpon16
|
sfu-10ge4
}
Global
Specifies an IU type in a slot.
Step 4
Replace the old IU with the new IU. Insert new IU into the intended slot.
Step 5
Change the admin state to
‘unlock’ for specified slot number with
slot unlock siu
com-
mand to make IU activating in the system
5.2.3
Rebooting IUs
To restart the specified IU, use the following command.
Command
Mode
Description
slot restart iu SLOT_NUMBER
Global
Restarts an interface module in the specified slot num-
ber.
To turn the power on/off of a specific IU, use the following command.
Command
Mode
Description
slot power iu SLOT_NUMBER
{
on
|
off
}
Global
Powers on/off an interface module in the specified slot
number.
slot power sfu mate on
Powers on the standby SFU module.
5.2.4
Default OS of IUs
To set the default OS of the IU, use the following command.
Command
Mode
Description
slot
default-os
iu
SLOT_NUMBER
{
os1
|
os2
}
Global
Sets the default OS of the IU.
(default: os1)
5.2.5
Displaying IUs Information
To display information of the specified slot, use the following command.
Command
Mode
Description
show
slot
cpuload
iu
{
SLOT_NUMBER
|
all
}
Enable
Global
Shows the specified slot information.
show
slot
memory
iu