UMN:CLI
User Manual
V8102
60
The following is an example of displaying the list of available commands of
Privileged
EXEC Enable
mode.
SWITCH#
show list
clear arp
clear arp IFNAME
clear ip arp inspection log
clear ip arp inspection statistics (vlan VLAN_NAME|)
clear ip bgp *
clear ip bgp * in
clear ip bgp * in prefix-filter
clear ip bgp * ipv4 (unicast|multicast) in
clear ip bgp * ipv4 (unicast|multicast) in prefix-filter
clear ip bgp * ipv4 (unicast|multicast) out
clear ip bgp * ipv4 (unicast|multicast) soft
clear ip bgp * ipv4 (unicast|multicast) soft in
clear ip bgp * ipv4 (unicast|multicast) soft out
clear ip bgp * out
clear ip bgp * soft
clear ip bgp * soft in
clear ip bgp * soft out
clear ip bgp * vpnv4 unicast in
clear ip bgp * vpnv4 unicast out
clear ip bgp * vpnv4 unicast soft
clear ip bgp * vpnv4 unicast soft in
clear ip bgp * vpnv4 unicast soft out
clear ip bgp <1-65535>
clear ip bgp <1-65535> in
clear ip bgp <1-65535> in prefix-filter
-- more --
Press the <
ENTER
> key to skip to the next list.
In case that the V8102 installed command shell, you can find out commands starting with
a specific alphabet. Input the first letter and question mark without space. The following is
an example of
finding out the commands starting “
s
” in
Privileged EXEC Enable
mode of
the V8102.
SWITCH#
s?
show
Show running system information
ssh
Configure secure shell
SWITCH#
s
In addition, it is possible to view variables you should input following commands. After in-
putting the command you need, make one space and input a question mark. The follow-
ing is an example of viewing variables after the
write
command. Please note that you
must input one space between the command and question mark.
SWITCH#
write ?
memory
Write to NV memory
terminal
Write to terminal
SWITCH#
write
i