UMN:CLI
User Manual
V8102
224
Interface
[GE/XE/GPON]
7.12.1
Max New Hosts
Max-new-hosts is to limit the number of users by configuring the number of MAC ad-
dresses that can be learned on the system and on the port for a second. The number of
MAC addresses that can be learned on the system has the priority.
To configure max new hosts, use the following command.
Command
Mode
Description
max-new-hosts
VALUE
Interface
[GE/XE/GPON]
The number of MAC addresses that can be learned
on the interface for a second.
VALUE: maximum MAC number <1-2147483646>
max-new-hosts
system
VALUE
Global
The number of MAC addresses that can be learned
on the system for a second.
VALUE: maximum MAC number <1-2147483646>
To delete configured max new hosts, use the following command.
Command
Mode
Description
no max-new-hosts
Interface
[GE/XE/GPON]
Deletes the number of MAC addresses that can be
learned on the interface.
no max-new-hosts system
Global
Deletes the number of MAC addresses that can be
learned on the system.
To display configured max new hosts, use the following command.
Command
Mode
Description
show max-new-hosts
Enable
Global
Interface
[GE/XE/GPON]
Shows the configured Max-new-hosts.
If MAC that already counted disappears before passing 1 second and starts learning
again, it is not counted. In case the same MAC is detected on the other port also, it is not
counted again. For example, if MAC that was learned on port 1 is detected on port 2, it is
supposed that MAC moved to the port 2. So, it is deleted from the port 1 and learned on
the port 2 but it is not counted.
