User Manual
UMN:CLI
V8102
195
0-7: LTM message priority (default: 7)
use-fdb-only: only MAC address learned in
FDB, not MPDB is to be used to determine
the egress port
To set a maximum Y.1731 traceroute cache hold time that cache entries will be retained,
use the following command.
Command
Mode
Description
ethernet oam traceroute cache
hold-time
<1-65535>
Global
Configures a hold time of traceroute cache entries.
(default: 100 minutes)
no ethernet oam traceroute
cache hold-time
Deletes a specified hold time of traceroute cache en-
tries and returns to the default setting.
A traceroute cache size is the number of entries which are stored in cache table. To set a
traceroute cache size in number of entry, use the following command.
Command
Mode
Description
ethernet oam traceroute cache
size
<1-4095>
Global
Configures the maximum numbers of entries in the
traceroute cache table. (default: 100)
no ethernet oam traceroute
cache size
Deletes a specified numbers of traceroute cache en-
tries and returns to the default setting.
To display Y.1731 traceroute cache information, use the following command.
Command
Mode
Description
show ethernet oam traceroute-cache
[
transac-
tion TRANSACTION_ID
]
Enable
Global
Shows the information of the traceroute
cache.
To delete Y.1731 traceroute cache entries, use the following command.
Command
Mode
Description
clear ethernet oam traceroute-
cache
Enable
Global
Removes the traceroute cache entries.
