UMN:CLI
User Manual
V8102
768
To guarantee a right operation of this feature, an ONU should be loaded with the newest
firmware.
13.2.7
Source MAC address Monitoring
The V8102 can monitor its source MAC table to find a defective ONUs (ONTs). Auto ONU
(ONT) blocking function can be used to manage and troubleshoot the defective ONU-
related problems.
To enable/disable OLT for source MAC address monitoring, use the following command.
Command
Mode
Description
olt srcmac-monitor enable
Interface
[GPON]
Enables the source MAC address monitoring.
olt srcmac-monitor enable auto-
onu-block
[
expire-timeout
<60-
65535>]
Enables the source MAC address monitoring with auto
ONU blocking feature
auto-onu-block: When an ONU fault occurs, the system
will disable the ONU
’s laser permanently.
60-65535: expire time (second)
olt srcmac-monitor disable
Disables the source MAC address monitoring.
To display the information of source MAC monitoring, use the following command.
Command
Mode
Description
show olt srcmac-monitor
[
gpon
OLT-ID
]
Enable
Global
Shows the configured source MAC address monitoring
for OLT.
show olt srcmac-monitor
Interface
[GPON]
To force the state of a blocked ONU ID to change to unblocked state, use the following
command.
Command
Mode
Description
onu unblock ONU-ID
Interface
[GPON]
Forces the state of a blocked ONU ID to change to
unblocked state.
To force the state of a unblocked ONU ID to change to blocked state, use the following
command.
Command
Mode
Description
onu block ONU-ID
Interface
[GPON]
Forces the state of a unblocked ONU ID to change to
blocked state.
!