User Manual
UMN:CLI
V8102
223
receive
|
transmit
}
[GE/XE/GPON]
transmit: traffic in the egress (TX) direction
no mirror direction
{
both
|
receive
|
transmit
}
Deletes the mirrored port configuration.
Step 4
To disable monitoring function, use the following command.
Command
Mode
Description
mirror disable
Global
Deactivates monitoring.
To display a configured port mirroring, use the following command.
Command
Mode
Description
show mirror
Enable
Global
Interface
[GE/XE/GPON]
Shows a configured port mirroring.
show mirror interface
{
gpon
|
gigabitethernet
|
tengiga-
bitethernet
}
IFPORT
7.12
Max Host
You can limit the number of users by configuring the maximum number of users also
named as max hosts for each Ethernet/PON port. In this case, you need to consider not
only the number of PCs in the network but also devices such as switches in the network.
For the V8102, you have to block the port like MAC filtering before configuring max hosts.
In case of ISPs, it is possible to arrange a billing plan for each user by using this configu-
ration.
To specify the maximum number of hosts that can be attached to an Ethernet/PON inter-
face, use the following command.
Command
Mode
Description
max-hosts
VALUE
Interface
[GE/XE/GPON]
Specifies the maximum number of hosts that be
attached to an Ethernet/PON port on this interface.
VALUE: the maximum number of hosts for a particu-
lar interface. Valid range is from 1 to 2147483646
hosts.
no max-hosts
Resets the allowable number of hosts attached to a
particular interface to the default value of unlimited
hosts.
To display the configured maximum number of hosts for interfaces, use the following
command.
Command
Mode
Description
show max-hosts
Enable
Global
Shows the configured maximum number of hosts for
the interfaces.
