UMN:CLI
User Manual
V8102
764
Command
Mode
Description
show olt auto-to-manual
Interface
[GPON]
13.2.1.5
Changing ONU Registration Mode
If user wants to change automatically the states of ONU (ONT) to manage manually at a
time, use the following command.
Command
Mode
Description
onu fix
{
all
|
ONU-ID
}
Interface
[GPON]
Changes automatically registered ONUs (ONTs) to
manage manually.
ONU-ID: ONU ID (1 to 128) or ONU serial number
13.2.1.6
ONU Service Mode
Depending on the individual FTTH subscriber network deployment, the GPON link can be
terminated with different client-side equipment options like Single Family Unit (SFU) and
Home Gateway Unit (HGU). To select the ONU network service mode, use the following
command.
Command
Mode
Description
onu service-mode ONU-ID
{
hgu
|
sfu
}
Interface
[GPON]
Specifies the network service mode of ONU.
ONU-ID: ONU ID (1 to 128) or ONU serial number
hgu: home gateway unit
sfu: single family unit
no onu service-mode
[
ONU-ID
]
Deletes the configure network service mode of ONU.
To display the configured ONU service mode, use the following command.
Command
Mode
Description
show onu service-mode
[
gpon
OLT-ID
]
Enable
Global
Shows the configured ONU service mode.
OLT-ID: OLT ID (PON port number)
ONU-ID: ONU ID (1 to 128) or ONU serial number
show onu service-mode
[
ONU-
ID
]
Interface
[GPON]
13.2.1.7
ONU Description
To specify or modify a description of an ONU, use the following command.
Command
Mode
Description
onu description ONU-ID
DESCRIPTION
Interface
[GPON]
Registers the ONU
’s description.
ONU ID (1 to 128) or ONU serial number
no onu description ONU-ID
Deletes the description of ONU.
