UMN:CLI
User Manual
V8102
270
fault: 3 seconds)
To the configured interval of ARP request messages, use the following command.
Command
Mode
Description
no ip arp-request interval mc_probe
Interface
[VLAN]
Deletes the configured interval of ARP request mes-
sage.
no ip arp-request interval retrans
no ip arp-request interval uc_probe
8.1.3
ARP Alias
Although clients are joined in the same client switch, it may be impossible to communi-
cate between them for security reasons. When you need to make them communicate
each other, the V8102 supports ARP alias, which responses the ARP request from client
net through the concentrating switch.
To register the address of client net range in ARP alias, use the following command.
Command
Mode
Description
arp alias
A.B.C.D A.B.C.D
[
XX:XX:XX:XX:XX:XX
]
Global
Registers the IP address range and MAC address in
ARP alias to make the system response to an ARP
request.
arp alias A.B.C.D A.B.C.D vlan
VLAN gateway GATEWAY
Registers gateway IP address within IP address range
to make the system response automatically MAC ad-
dress of gateway.
VLAN: 1-4094
GATEWAY: gateway IP address
no arp alias
A.B.C.D A.B.C.D
Deletes the registered IP address range of ARP alias.
To register the MAC address of client in ARP alias per VLAN interface, use the following
command.
Command
Mode
Description
ip arp alias
[
XX:XX:XX:XX:XX:XX
]
Interface
[VLAN]
Registers a MAC address in ARP alias to make the
VLAN response to an ARP request.
no ip arp alias
Deletes the registered MAC address of ARP alias.
Unless you input a MAC address, the
MAC address of user’s device will be used for ARP
response.
To set aging time of gateway IP address in ARP alias, use the following command.
Command
Mode
Description
arp alias aging-time
<5-2147483647>
Global
Sets the aging time of gateway IP address.
5-2147483647: aging time (default: 300 seconds)
no arp alias aging-time
Deletes the aging time of gateway IP address.
i
