User Manual
UMN:CLI
V8102
803
ani-temperature threshold
{
low
VALUE
[
high VALUE
]
|
high VAL-
UE
[
low VALUE
] }
Configures the temperature threshold and sends the
configured threshold value to ONUs. The ONUs moni-
tors the change of values and sends temperature
high/low alarm to OLT when the temperature exceeds
the threshold or it is below the threshold.
VALUE: temperature threshold value ( -128
∼
127
℃
)
ani-tx-bias threshold
{
low VAL-
UE
[
high VALUE
]
|
high VALUE
[
low VALUE
] }
Configures the txbias threshold and sends the config-
ured threshold value to ONUs. The ONUs monitors the
change of values and sends txbias high/low alarm to
OLT when the txbias exceeds the threshold or it is
below the threshold.
VALUE: tx-bias threshold value (0
∼
131
mA)
ani-voltage threshold
{
low VAL-
UE
[
high VALUE
]
|
high VALUE
[
low VALUE
] }
Configures the voltage threshold and sends the config-
ured threshold value to ONUs. The ONUs monitors the
change of values and sends voltage high/low alarm to
OLT when the voltage exceeds the threshold or it is
below the threshold.
VALUE: voltage threshold value ( 0
∼
10.0 V)
To delete the threshold of module operation depending on specified monitoring type, use
the following command.
Command
Mode
Description
no
{
ani-rx-power
|
ani-voltage
|
ani-tx-bias
|
ani-tx-power
|
ani-
temperature
}
threshold
[{
low
|
high
}]
ONU-Profile
Deletes the configured threshold.
13.3.2.8
CPU Packet Limit
ONU CPU packet limitation is one of important protecting mechanism from traffic attack-
ing. For example, the ONU CPU packet forwarding is configured with 1000 PPS for
broadcast packet, 1000 broadcast packet per second will be forwarded by ONU CPU.
To configure maximum PPS of ONU for Broadcast / Unknown-multicast / L2 DLF type of
packet, use the following command.
Command
Mode
Description
cpu-packet-limit
{
broadcast
|
multicast
|
dlf
}
RATE
ONU-Profile
Limits the broadcast / unknown-multicast / L2 DLF
packets per second forwarded by ONU CPU.
RATE: 100 to 40000 PPS (Unit: packet per second )
no cpu-packet-limit
{
broadcast
|
multicast
|
dlf
}
Deletes the configured CPU packet limit.
