[edit]
user@switch2#
show
protocols {
oam {
ethernet {
link-fault-management {
interface ge-0/0/1 {
negotiation-options {
allow-remote-loopback;
}
}
}
}
}
Verification
Verifying That OAM LFM Has Been Configured Properly
Purpose
Verify that OAM LFM has been configured properly.
Action
Use the show oam ethernet link-fault-management command:
user@switch1#
show oam ethernet link-fault-management
Sample Output
Interface: ge-0/0/0.0
Status: Running, Discovery state: Send Any
Peer address: 00:19:e2:50:3b:e1
Flags:Remote-Stable Remote-State-Valid Local-Stable 0x50
Remote entity information:
Remote MUX action: forwarding, Remote parser action: forwarding
Discovery mode: active, Unidirectional mode: unsupported
Remote loopback mode: supported, Link events: supported
Variable requests: unsupported
Meaning
When the output displays the MAC address and the discover state is
Send Any
, it means
that OAM LFM has been configured properly.
Related
Documentation
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
•
•
Understanding Ethernet OAM Link Fault Management for an EX Series Switch on
page 3725
Configuring Ethernet OAM Link Fault Management
•
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
Configuring Ethernet OAM Link Fault Management (CLI Procedure)
Ethernet OAM link fault management (LFM) can be used for physical link-level fault
detection and management. The IEEE 802.3ah LFM works across point-to-point Ethernet
links either directly or through repeaters.
3729
Copyright © 2010, Juniper Networks, Inc.
Chapter 131: Ethernet OAM Link Fault Management
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
