Juniper JUNOS OS 10.3 - SOFTWARE Manual Download

Page: 323 / 3946

flag flag

—Tracing operation to perform. To specify more than one tracing operation,

include multiple

flag

statements. You can include the following flags:

•

all trace-level

—Trace all SBC process operations.

•

common trace-level

—Trace common events.

•

configuration trace-level

—Trace configuration events.

•

device-monitor trace-level

—Trace device monitor events.

•

ipc trace-level

—Trace IPC events.

•

memory—pool trace-level

—Trace memory pool events.

•

trace-level

—Trace level options are related to the severity of the event being traced.

When you choose a trace level, messages at that level and higher levels are captured.
Enter one of the following trace levels as the

trace-level

•

debug

—Log all code flow of control.

•

error

—Log failures with a short-term effect.

•

info

—Log summary for normal operations, such as the policy decisions made for a

call.

•

trace

—Log program trace START and EXIT macros.

•

warning

—Log failure recovery events or failure of an external entity.

•

ui trace-level

—Trace user interface operations.

Required Privilege

Level

system—To view this statement in the configuration.
system-control—To add this statement to the configuration.

Documentation

•

See “Troubleshooting the IMSG” in the

Junos Multiplay Solutions Guide

•

System Management Configuration Statements

227

Chapter 16: Configuration Statements for System Setup

Summary of Contents for JUNOS OS 10.3 - SOFTWARE


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOS OS 10.3 - SOFTWARE

Reviews:

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brands by name

Popular brands

Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Search results

Summary of Contents for JUNOS OS 10.3 - SOFTWARE

Reviews:

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brands by name

Popular brands