CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP
Series
5-93
5.6.6
BARCODE FORMAT COMMAND
[ESC] XB
~
In the case of GS1 Databar
Format
c
[ESC] XBaa; bbbb, cccc, d, e, ff, g, hhhh (, ijjjjjjjjjj, kk) (= sss ------ sss) [LF] [NUL]
d
[ESC] XBaa; bbbb, cccc, d, e, ff, g, hhhh (, ijjjjjjjjjj, kk) (; tt
1
, tt
2
, tt
3
, ------, tt
20
) [LF]
[NUL]
Term aa:
Barcode
number
00 to 31
bbbb:
X-coordinate of the print origin of barcode
Fixed at 4 digits (in 0.1 mm units)
cccc:
Y-coordinate of the print origin of barcode
4 or 5 digits (in 0.1 mm units)
d:
Type of barcode
b: GS1 Databar family
e:
Version (Type of GS1 Databer)
1:
GS1 Databar Omni-directional
2:
GS1 Databar Stacked
3:
GS1 Databar Stacked Omni-directional
4:
GS1 Databar Limited
5:
GS1 Databar Expanded
6:
GS1 Databar Expanded Stacked
ff:
1-module
width
01 to 15 (in units of dots)
g:
Rotational angle of barcode
0: 0°
1: 90°
2: 180°
3: 270°
hhhh:
Height of the barcode
0000 to 1000 (in 0.1 mm units)
ijjjjjjjjjj:
Increment/decrement
(Omissible. If omitted, increment/decrement is not performed.)
i: Indicates whether to increment or decrement
+:
Increment
-: Decrement
jjjjjjjjjj:
Skip
value
0000000000 to 9999999999
kk:
No. of digits after zero suppression
(Omissible. If omitted, zero suppression is not performed.)
00 to 20
* Reserved in the case of the compatible mode for the B-SP series
