CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP
Series
7-19
7.5.6
BARCODE HORIZONTAL SIZE COMMAND
[GS] w
Function
Sets the horizontal size of the barcode. For QR code, the 1-cell width is set.
Format
[GS]
wn
Term
n:
Horizontal size of the barcode (1 byte)
02H to 05H
Initial
value
n:
02H
Explanation
(1)
When
“
n
”
is set to any value other than the above, a command error occurs.
(2) The horizontal size designated by this command is as follows.
1 dot = 1/8 mm on the 203-dpi printer.
The maximum value varies depending on model and barcode type.
Model
B-EP2DL-GHxx
B-EP2DL-GHxx
Range
02H to 05H
02H to 0AH
Initial value
02H
02H
JAN-system *1
Max. value
03H
06H
NW7-system *2
Max. value
05H
0AH
PDF417 Max.
value
03H
06H
QR code
Max. value
05H
0AH
*1 The JAN system refers to JAN8, EAN8, EAN8 + 2 digits, EAN8 + 5 digits,
JAN13, EAN13, EAN13 + 2 digits, EAN13 + 5 digits, EAN128, UCC/EAN128,
CODE128, UPC-E, UPC-E + 2 digits, UPC-E + 5 digits, UPC-A, UPC-A + 2
digits, UPC-A + 5 digits and CODE93.
*2 The NW7 system refers to NW7, CODE39, Interleaved 2 of 5 and MSI.
[JAN8, EAN8, EAN8 + 2 digits, EAN8 + 5 digits, JAN13, EAN13, EAN13 + 2 digits,
EAN13 + 5 digits, EAN128, UCC/EAN128, CODE128, UPC-E, UPC-E + 2 digits,
UPC-E + 5 digits, UPC-A, UPC-A + 2 digits, UPC-A + 5 digits, CODE93]
n
1 module
2 modules
3 modules
4 modules
Bar Space
Bar Space
Bar
Space
Bar Space
02H
2 4 6 8
03H
3 6 9 12
04H 4
8
12
16
05H
5 10 15 20
06H
6 12 18 24
07H
7 14 21 28
08H
8 16 24 32
09H
9 18 27 36
(Unit:
dots)
