CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP
Series
8-36
8.10.22 INTERNATIONAL CHARACTER SELECT COMMAND
[ESC] R
Function
Selects an international character set.
The value specified by this command is invalid because the B-EP series does not
support this function.
Format [ESC]
Rn
Term ASCII:
ESC
R
Hex: 1Bh 52h
[Parameter]
n: Selecting international character set
0
≤
n
≤
10 (00h
≤
n
≤
0Ah)
n Character
set
0 USA
1 France
2 Germany
3 UK
4 Denmark
5 Sweden
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark
2
Default value n: 0
Explanation
(1) Even if an international character set is switched between Japan and other
countries by this command, there is no impact upon the Chinese character code
system.
[Program
example]
for(i=0;i<11;i++)
{
fprintf( stdprn, "\033R"); /* Selecting country */
fputc( i, stdprn );
fprintf( stdprn, " # $ @ [ \\ ] ^ ` { | } ~ \n");
}
