CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP
Series
5-142
5.7
COMMANDS RELATED TO PRINT DATA
5.7.1
BIT MAP FONT DATA COMMAND
[ESC] RC
Function
Provides data for the bit map font row.
Format
c
[ESC] RCaaa; bbb ------- bbb [LF] [NUL]
d
Link Field Data Command
[ESC] RC; ccc --- ccc [LF] ddd --- ddd [LF] ------- [LF] xxx --- xxx [LF] [NUL]
Term aaa:
Character
string
number
000 to 199 (Two digits, 00 to 99, also acceptable.)
When 000 and 00 are designated at the same time, the data
designated later is automatically selected.
bbb ------- bbb: Data string to be printed
Max. 255 characters
(Max. 127 characters when the font type is U, V, r, s, w or 51, and max.
63 characters when it is r as a 4-byte code.)
Any excess data will be discarded.
For character codes, refer to the character code table mentioned later.
ccc ------- ccc: Data string of link field No. 1
ddd ------- ddd: Data string of link field No. 2
Ú
xxx ------- xxx: Data string of link field No. 99
