0
Non-secure EL1 writes are not trapped. This is the reset value.
1
Non-secure EL1 writes are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TTLB, [25]
Traps TLB maintenance instructions. The possible values are:
0
Non-secure EL1 TLB maintenance instructions are not trapped. This is the reset value.
1
TLB maintenance instructions executed from Non-secure EL1that are not
UNDEFINED
are
trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TPU, [24]
Traps cache maintenance instructions to
Point of Unification
(POU). The possible values are:
0
Cache maintenance instructions are not trapped. This is the reset value.
1
Cache maintenance instructions to the POU executed from Non-secure EL1 or EL0 that are
not
UNDEFINED
are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TPC, [23]
Traps data or unified cache maintenance instructions to
Point of Coherency
(POC). The possible
values are:
0
Data or unified cache maintenance instructions are not trapped. This is the reset value.
1
Data or unified cache maintenance instructions by address to the POC executed from Non-
secure EL1 or EL0 that are not
UNDEFINED
are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TSW, [22]
Traps data or unified cache maintenance instructions by Set or Way. The possible values are:
0
Data or unified cache maintenance instructions are not trapped. This is the reset value.
1
Data or unified cache maintenance instructions by Set or Way executed from Non-secure
EL1 that are not
UNDEFINED
are trapped to EL2.are not trapped.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TACR, [21]
Traps Auxiliary Control registers. The possible values are:
0
Accesses to Auxiliary Control registers are not trapped. This is the reset value.
1
Accesses to ACTLR in AArch32 state or the ACTLR_EL1 in the AArch64 state from Non-
secure EL1 are trapped to EL2.
TIDCP, [20]
Trap Implementation Dependent functionality. When 1, this causes accesses to the following
instruction set space executed from Non-secure EL1 to be trapped to EL2:
B2 AArch64 system registers
B2.48 Hypervisor Configuration Register, EL2
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B2-435
Non-Confidential
Summary of Contents for Cortex-A35
