A9.1
About the ACE master interface
You can configure the processor to use the ACE protocol for the master memory interface.
Read responses
The ACE master can delay accepting a read data channel transfer by holding
RREADY
LOW for an
indeterminate number of cycles.
RREADY
can be deasserted LOW between read data channel transfers
that form part of the same transaction.
The ACE master asserts the read acknowledge signal
RACK
HIGH in the
ACLK
cycle following
acceptance of the last read data channel transfer for a transaction.
RACK
is asserted in AXI
compatibility mode in addition to ACE configurations.
• For interoperability of system components, Arm recommends that components interfacing with the
ACE master are fully ACE compliant with no reliance on the subset of permitted
RACK
behavior
described for the processor.
• If the interconnect does not perform hazarding between coherent and non-coherent requests, then,
after it has returned the first transfer of read data for a non-coherent read, it must return all the
remaining read transfers in the transaction, without requiring progress of any snoops to the cluster
that could be to the same address.
Write responses
The ACE master requires that the slave does not return a write response until it has received the write
address.
The ACE master always accepts write responses without delay by holding
BREADY
HIGH. It asserts
the write acknowledge signal
WACK
HIGH in the
ACLK
cycle following acceptance of a write
response.
WACK
is asserted in AXI compatibility mode in addition to ACE configurations.
For interoperability of system components, Arm recommends that components interfacing with the ACE
master are fully ACE compliant with no reliance on the subset of permitted
BREADY
and
WACK
behavior described for the processor.
Barriers
The processor does not send barrier transactions to the interconnect. All barriers are terminated within
the cluster.
You must ensure that your interconnect and any peripherals connected to it do not return a write response
for a transaction until that transaction would be considered complete by a later barrier. This means that
the write must be observable to all other masters in the system. Arm expects the majority of peripherals
to meet this requirement.
Related information
A8.2 AXI privilege information
on page A8-107
A9 ACE Master Interface
A9.1 About the ACE master interface
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
A9-114
Non-Confidential
Summary of Contents for Cortex-A35
