AArch32
All CP15
MCR
and
MRC
instructions as follows:
• CRn is 9, Opcode1 is 0 to 7, CRm is c0, c1, c2, c5, c6, c7, or c8, and Opcode2 is
0 to 7.
• CRn is 10, Opcode1 is 0 to 7, CRm is c0, c1, c4, or c8, and Opcode2 is 0 to 7.
• CRn is 11, Opcode1 is 0 to 7, CRm is c0 to c8, or c15, and Opcode2 is 0 to 7.
AArch64
Reserved control space for
IMPLEMENTATION DEFINED
functionality.
Accesses from EL0 are
UNDEFINED
. The reset value is 0.
TSC, [19]
Traps
SMC
instruction. The possible values are:
0 SMC
instruction in not trapped. This is the reset value.
1 SMC
instruction executed in Non-secure EL1 is trapped to EL2 for AArch32 and AArch64
Execution states.
TID3, [18]
Traps ID group 3 registers. The possible values are:
0
ID group 3 register accesses are not trapped. This is the reset value.
1
Reads to ID group 3 registers executed from Non-secure EL1 are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TID2, [17]
Traps ID group 2 registers. The possible values are:
0
ID group 2 register accesses are not trapped. This is the reset value.
1
Reads to ID group 2 registers and writes to CSSELR and CSSELR_EL1executed from Non-
secure EL1 or EL0, if not
UNDEFINED
, are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TID1, [16]
Traps ID group 1 registers. The possible values are:
0
ID group 1 register accesses are not trapped. This is the reset value.
1
Reads to ID group 1registers executed from Non-secure EL1 are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TID0, [15]
Traps ID group 0 registers. The possible values are:
0
ID group 0 register accesses are not trapped. This is the reset value.
1
Reads to ID group 0 registers executed from Non-secure EL1 are trapped to EL2.
See the
Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile
for the
registers covered by this setting.
TWE, [14]
Traps
WFE
instruction if it would cause suspension of execution. For example, if there is no
pending WFE event. The possible values are:
0 WFE
instruction is not trapped. This is the reset value.
B2 AArch64 system registers
B2.48 Hypervisor Configuration Register, EL2
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B2-436
Non-Confidential
Summary of Contents for Cortex-A35
