1
Linked data address match.
On Cold reset, the field reset value is architecturally UNKNOWN.
LBN, [19:16]
Linked breakpoint number. For Linked data address watchpoints, this specifies the index of the
Context-matching breakpoint linked to.
On Cold reset, the field reset value is architecturally UNKNOWN.
SSC, [15:14]
Security state control. Determines the Security states under which a watchpoint debug event for
watchpoint n is generated. This field must be interpreted along with the HMC and PAC fields.
On Cold reset, the field reset value is architecturally UNKNOWN.
HMC, [13]
Higher mode control. Determines the debug perspective for deciding when a watchpoint debug
event for watchpoint n is generated. This field must be interpreted along with the SSC and
PACfields.
On Cold reset, the field reset value is architecturally UNKNOWN.
BAS, [12:5]
Byte address select. Each bit of this field selects whether a byte from within the word or double-
word addressed by DBGWVR
n
_EL1 is being watched. See the
Arm
®
Architecture Reference
Manual Armv8, for Armv8-A architecture profile
for more information.
LSC, [4:3]
Load/store access control. This field enables watchpoint matching on the type of access being
made. The possible values are:
0b01
Match instructions that load from a watchpointed address.
0b10
Match instructions that store to a watchpointed address.
0b11
Match instructions that load from or store to a watchpointed address.
All other values are reserved, but must behave as if the watchpoint is disabled. Software must
not rely on this property as the behavior of reserved values might change in a future revision of
the architecture.
Ignored if E is 0.
On Cold reset, the field reset value is architecturally UNKNOWN.
PAC, [2:1]
Privilege of access control. Determines the exception level or levels at which a watchpoint
debug event for watchpoint n is generated. This field must be interpreted along with the SSC
and HMCfields.
On Cold reset, the field reset value is architecturally UNKNOWN.
E, [0]
Enable watchpoint n. Possible values are:
0
Watchpoint disabled.
1
Watchpoint enabled.
On Cold reset, the field reset value is architecturally UNKNOWN.
C7 AArch64 debug registers
C7.3 Debug Watchpoint Control Registers, EL1
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C7-640
Non-Confidential
Summary of Contents for Cortex-A35
