A5.9
Error injection
To support testing of error handling software, the processor provides the capability to force double-bit
errors to be injected into the L1 D-cache data RAMs, the L2 data RAMs, and the L2 tag RAMs.
Error injection on the L1 D-cache data RAMs is enabled by setting the CPUACTLR.L1DEIEN bit.
While this bit is set, double-bit errors are injected on all writes to the L1 D-cache data RAMs for the first
word of each 32-byte region. This corresponds to bytes with an address where bits [4:2] are
0b000
. The
L1 D-cache RAMs can be written to because of:
• Explicit stores from the core.
• Cache line fetches into the cache, as a result of:
— Load instructions.
— Store instructions.
— Preload instructions.
— Data prefetches.
— Pagewalks.
Error injection on the L2 data RAMs is enabled by setting the L2ACTLR.L2DEIEN bit. While this bit is
set, double-bit errors are injected on all writes to the L2 cache data RAMs. The L2 data RAMs can be
written to because of:
• Explicit stores from one of the cores.
• Instruction fetches or prefetches.
• Evictions from the L1 Data cache.
• ACP accesses.
Error injection on the L2 tag RAMs is enabled by setting the L2ACTLR.L2TEIEN bit. While this bit is
set, double-bit errors are injected on all writes to the L2 tag RAMs. The L2 cache tag RAMs can be
written because of:
• Explicit stores from one of the cores.
• L2 allocations caused by instruction fetches or prefetches.
• Evictions from the L1 Data cache.
• ACP accesses.
• Snoop operations.
• Cache maintenance instructions.
A5 Cache Behavior and Cache Protection
A5.9 Error injection
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
A5-87
Non-Confidential
Summary of Contents for Cortex-A35
