show interfaces transceiver
— displays the physical status and operational status of
an installed transceiver. The output also displays the transceiver’s serial number.
show memory
View current memory usage on the MXL switch.
Syntax
show memory [stack-unit
0–5
]
Parameters
stack-unit
0–5
(OPTIONAL) Enter the keywords
stack-unit
then the stack
unit ID of the stack member to display memory information
on the designated stack member.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The output for
show memory
displays the memory usage of LP part (sysdlp) of the
system. The sysdlp is an aggregate task that handles all the tasks running on the
CPU.
Example
Dell#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit
1-99
[details] | stack-unit
0–5
| summary | ipc | memory [stack-unit
0–5
]]
Parameters
management-
unit
1-99
[details]
(OPTIONAL) Display processes running in the control
processor. The
1-99
variable sets the number of tasks to
display in order of the highest CPU usage in the past five (5)
seconds. Add the keyword
details
to display all running
processes (except sysdlp). Refer to Example (management-
unit).
stack-unit
0–5
(OPTIONAL) Enter the keyword
stack-unit
then the stack
member ID. The range is from 0 to 5.
Control and Monitoring
107