Dell MXL 10GbE Reference Manual Download

Page: 59 / 1545

File Management

This chapter contains command line interface (CLI) commands needed to manage the configuration files

as well as other file management commands.
The commands in this chapter are supported by the Dell Networking Operating System (OS).

Change to a different working directory.

Syntax

directory

Parameters

directory

(OPTONAL) Enter the following:

•

flash:

(internal Flash) or any sub-directory

•

usbflash:

(external Flash) or any sub-directory

Command
Modes

EXEC Privilege

Command
History

Version
8.3.16.0

Introduced on the MXL 10/40GbE Switch IO Module.

copy

Copy one file to another location. The Dell Networking Operating System (OS) supports IPv4 addressing

for FTP, TFTP, and SCP (in the

hostip

field).

Syntax

copy

source-file-url

destination-file-url

Parameters

Enter the following location keywords and information:

file-url

To copy a file
from the
internal FLASH

Enter the keyword

flash://

then the

filename.

File Management

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands

Dell MXL 10GbE, Reference Manual

Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands