Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
ip tacacs source-interface
Specify an interface’s IP address as the source IP address for connections.
Syntax
ip tacacs source-interface
interface
To delete a source interface, use the
no ip tacacs source-interface
command.
Parameters
interface
Enter the following keywords and slot/port or number
information:
• For Loopback interfaces, enter the keyword
loopback
then a number from zero (0) to 16838.
• For the Null interface, enter the keywords
null 0
.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
tacacs-server host
Specify a host.
Syntax
tacacs-server host {
hostname
|
ipv4-address
} [port
number
]
[timeout
seconds
] [key
key
]
Parameters
hostname
Enter the name of the server host.
ipv4-address
Enter the IPv4 address (A.B.C.D) of the server host.
Security
1181
