match external
{1 | 2}
(OPTIONAL) Enter the keywords
match external
to
redistribute OSPF external routes. You can specify
1
or
2
to
redistribute those routes only.
match internal
(OPTIONAL) Enter the keywords
match internal
to
redistribute OSPFv3 internal routes only.
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of an established route map.
If the route map is not configured, the default is
deny
(to
drop all routes).
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When you enter the
redistribute ospf process-id
command without any
other parameters, the system redistributes all OSPF internal routes, external type 1
routes, and external type 2 routes.
router bgp
Enter ROUTER BGP mode to configure and enable BGP.
Syntax
router bgp
as-number
To disable BGP, use the
no router bgp
as-number
command.
Parameters
as-
number
Enter the AS number. The range is from 1 to 65535.
Defaults
Not enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP)
743
