flash
After entering the keyword
flash
you can either follow it
with the location of the source file in this form:
//filepath
,
or press Enter to launch a prompt sequence.
usbflash
After entering the keyword
usbflash
you can either follow
it with the location of the source file in this form:
//
filepath
, or press Enter to launch a prompt sequence.
A:
Enter this keyword to upgrade the bootflash partition A.
B:
Enter this keyword to upgrade the bootflash partition B.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Reset the card using the
power-cycle
option after restoring the FPGA command.
Example
Dell#upgrade system ?
flash: Copy from flash file system (flash://filepath)
ftp: Copy from remote file system, IPv4 or IPv6,
(ftp:/
/userid:password@hostip/filepath)
scp: Copy from remote file system, IPv4 or IPv6,
(scp:/
/userid:password@hostip/filepath)
stack-unit Sync image to the stack-unit
tftp: Copy from remote file system, IPv4 or IPv6,
(tftp:/
/hostip/filepath)
usbflash: Copy from usbflash file system (usbflash://
filepath)
Dell#
verify
Validate the software image on the flash drive after the image has been transferred to the system, but
before the image has been installed.
Syntax
verify
{
md5
|
sha256
}[
flash
:// ]
img-file
[
hash-value
]
Parameters
md5
Enter the
md5
keyword to use the MD5 message-digest
algorithm.
sha256
Enter the
sha256
keyword to use the SHA256 Secure Hash
Algorithm
76
File Management