clear ip mroute
Clear learned multicast routes on the multicast forwarding table. To clear the protocol-independent
multicast (PIM) tree information base, use the
clear ip pim tib
command.
Syntax
clear ip mroute {
group-address
[
source-address
] | * | snooping}
Parameters
group-address
[
source-
address
]
Enter the multicast group address and source address (if
desired), in dotted decimal format, to clear information on a
specific group.
*
Enter
*
to clear all multicast routes.
snooping
Enter the keyword
snooping
to delete multicast snooping
route table entries.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
clear ip pim tib
Clear PIM tree information from the PIM database.
Syntax
clear ip pim tib [group]
Parameters
group
(OPTIONAL) Enter the multicast group address in dotted
decimal format (A.B.C.D).
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If you use this command on a local VLT node, all multicast routes from the local
PIM TIB, the entire multicast route table, and all the entries in the data plane are
deleted. The entries in Peer PIM TIB (Sync) are not deleted but are marked for re-
download. Both local and synced routes are removed from the multicast route
table. The peer VLT node clears synced routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted
from the multicast route table.
1332
Virtual Link Trunking (VLT)
