description
Enter a description of the IS-IS routing protocol.
Syntax
description {
description
}
To remove the description, use the
no description {
description
}
command.
Parameters
description
Enter a description to identify the IS-IS protocol (80
characters maximum).
Defaults
none
Command
Modes
ROUTER ISIS
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
router isis
— Enter ROUTER mode on the switch.
distance
Define the administrative distance for learned routes.
Syntax
distance
weight
[
ip-address mask
[
prefix-list
]]
To return to the default values, use the
no distance weight
command.
Parameters
weight
The administrative distance value indicates the reliability of a
routing information source. The range is from 1 to 255. (A
higher relative value indicates lower reliability. Routes with
smaller values are given preference.) The default is
115
.
ip-address
mask
(OPTIONAL) Enter an IP address in dotted decimal format
and enter a mask in either dotted decimal or /prefix format.
prefix-list
(OPTIONAL) Enter the name of a prefix list name.
Defaults
weight =
115
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
800
Intermediate System to Intermediate System (IS-IS)
