Defaults
Disabled (that is, the interface does not receive directed broadcast packets)
Command
Modes
INTERFACE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
ip domain-list
Configure names to complete unqualified host names.
Syntax
ip domain-list
name
To remove the name, use the
no ip domain-list
name
command.
Parameters
name
Enter a domain name to be used to complete unqualified
names (that is, incomplete domain names that cannot be
resolved).
Defaults
Disabled.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To configure a list of possible domain names, configure the
ip domain-list
command up to six times.
If you configure both the
ip domain-name
and
ip domain-list
commands,
the software tries to resolve the name using the
ip domain-name
command. If
the name is not resolved, the software goes through the list of names configured
with the
ip domain-list
command to find a match.
To enable dynamic resolution of hosts, use the following steps:
• specify a domain name server with the
ip name-server
command
• enable DNS with the
ip domain-lookup
command
To view current bindings, use the
show hosts
command. To view a DNS-related
configuration, use the
show running-config resolve
command.
Related
Commands
ip domain-name
— specifies a DNS server.
624
IPv4 Routing
