undebug all
Disable all debug operations on the system.
Syntax
undebug all
Defaults
none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
virtual-ip
Configure a virtual IP address for the active management interface. You can configure virtual addresses
both for IPv4 independently.
Syntax
virtual-ip {
ipv4-address
}
Parameters
ipv4-address
Enter the IP address of the active management interface in a
dotted decimal format (A.B.C.D.).
Defaults
none
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Each time you issue this command, it replaces the previously configured address of
the same family. The
no virtual-ip
command takes an address/prefix-length
argument, so that the desired address only is removed. If you enter the
no
virtual-ip
command without any specified address, the IPv4 virtual addresses
are removed.
Example
Dell#virtual-ip 10.11.197.99/16
write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write {memory | terminal}
Parameters
memory
Enter the keyword
memory
to copy the current running
configuration to the startup configuration file. This
Control and Monitoring
123