timers bgp
Adjust the BGP Keep Alive and Hold Time timers.
Syntax
timers bgp
keepalive holdtime
To return to the default, use the
no timers bgp
command.
Parameters
keepalive
Enter a number for the time interval, in seconds, between
keepalive messages sent to the neighbor routers. The range
is from 1 to 65535. The default is
60 seconds
.
holdtime
Enter a number for the time interval, in seconds, between
the last keepalive message and declaring the router dead.
The range is from 3 to 65535. The default is
180 seconds
.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the
internet and connecting multicast topologies between BGP and autonomous systems (ASs).
MBGP is implemented as per IETF RFC 1858.
debug ip bgp dampening
View information on routes being dampened.
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the
no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening
Enter the keyword
dampening
to clear route flap dampening
information.
Command
Modes
EXEC Privilege
392
Border Gateway Protocol IPv4 (BGPv4)