Parameters
ebgp
Enter the keyword
ebgp
to enable multipath support for
External BGP routes.
ibgp
Enter the keyword
ibgp
to enable multipath support for
Internal BGP routes.
number
Enter a number as the maximum number of parallel paths.
The range is from 1 to 16. The default is
1
.
Defaults
1
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If you enable this command, use the
capture bgp-pdu max-buffer-size
command to recompute the best path.
neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
Syntax
neighbor {
ipv6-address
|
peer-group-name
} activate
To disable, use the
no neighbor {
ipv6-address
|
peer-group-name
}
activate
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Identify a peer group by name.
activate
Enter the keyword
activate
to enable the identified
neighbor or peer group in the new AFI/SAFI.
Defaults
Disabled.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP)
721
