2-285
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable time-server
cable time-server
To enable the integrated time-of-day (ToD) server on the Cisco CMTS series, enter the
cable time-
server
command in global
configuration mode. To disable the time-of-day server function, use the
no
form of this command.
cable time-server
no cable time-server
Syntax Description
This command has no keywords or arguments.
Defaults
Disabled
Command Modes
Global configuration
Usage Guidelines
Per the DOCSIS specifications, the ToD server uses the UDP protocol, so UDP minor servers must also
be enabled using the
service udp-small-servers
max-servers no-limit
command.
Command History
Examples
The following example shows how to enable the time-of-day server:
router#
configure terminal
router(config)#
service udp-small-servers max-servers no-limit
router(config)#
cable time-server
router(config)#
Release
Modification
12.0(4)XI
This command was introduced.