5-67
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 5 Cisco CMTS Debugging Commands
debug cable remote-query
debug cable remote-query
To display debug messages for remote modem queries, use the
debug cable remote-query
command in
privileged EXEC mode. To stop displaying debug messages, use the
no
form of this command.
debug cable remote-query
no debug cable remote-query
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Examples
The following example shows typical debugging output for a successful poll of the CMs:
router#
debug cable remote-query
remote-query debugging is on
.
For IP address 209.165.200.223
Nov 10 15:56:50.241: docsIfSignalQualityEntry.5.4 = 380
Nov 10 15:56:50.241: docsIfMibObjects.2.2.1.3.2 = 360
Nov 10 15:56:50.245: docsIfDownstreamChannelEntry.6.4 = -30
Nov 10 15:56:50.245: docsIfUpstreamChannelEntry.6.3 = 12422
Nov 10 15:56:50.249: docsIfSignalQualityEntry.6.4 = 0
Nov 10 15:56:50.477:
The following example shows typical debugging output when the waiting queue at the CMTS is empty:
SNMP proxy exec got event, but queue is empty
The following example shows typical debugging output when you try to modify the polling interval or
community string while the polling in is progress:
Community string if modified will not be reflected
Note
The polling interval will be changed but to change the community string, you must unconfigure
the
snmp-server community
command and reconfigure it with the new community string.
Release
Modification
12.0(7)XR, 12.1(2)T
This command was introduced.
12.1(2)EC1
Support for this command was added to the 12.1 EC train.
12.2(4)BC1b
Support for this command was added to the 12.2 BC train.