2-478
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
snmp-server enable traps cable
Usage Guidelines
For other SNMP commands that affect the operation of the CMTS, see the
Cisco IOS Configuration
Fundamentals Command Reference Guide
.
Examples
The following example shows how to enable all traps for cable-related events except HCCP switchovers
on the CMTS:
Router#
configure terminal
Router(config)#
snmp-server enable traps cable cm-chover cm-onoff cm-remote-query hopping
Router(config)#
The following example shows how to enable traps for any HCCP switchovers that occur on the CMTS:
Router#
configure terminal
Router(config)#
snmp-server enable traps cable hccp-failover
Router(config)#
The following example shows how to enable traps for when a user violates the maximum bandwidth for
the quality of service (QoS) profile specified by their enforce-rule.
Router#
configure terminal
Router(config)#
snmp-server enable traps cable enforce-rule
Router(config)#
Related Commands
12.2(4)BC1
This command was supported on the Cisco uBR10012 universal broadband
router. The
cmts-event
option was also removed as redundant.
12.2(8)BC1 The
hccp-failover
option was supported on the Cisco uBR10012 router.
12.2(11)BC1 The
hccp-failover
option was supported on the Cisco uBR7200 series
router.
12.2(15)BC1
The
enforce-rule
option was added to generate traps for subscribers who
violate their enforce-rule QoS profile.
12.2(15)BC21 The
dmic-lock
and
usage
options were added.
Release
Modification
Command
Description
cable modem remote-query
Enables and configures the remote-query feature to gather CM
performance statistics on the CMTS.
debug cable remote-query
Turns on debugging to gather information from remote CMs.
show cable modem remote-
query
Displays the statistics accumulated by the remote-query feature.