3-201
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show hccp interface
show hccp interface
To display information on all Hot Standby Connection-to-Connection Protocol (HCCP) groups
associated with a specific cable interface, use the
show hccp interface
command in user EXEC or
privileged EXEC mode.
show hccp interface
interface
[
brief
|
detail
]
Syntax Description
Command Modes
User EXEC, Privileged EXEC
Command History
Examples
The following examples are from the
show hccp interface cable 4/0
and
show hccp interface cable 4/0
brief
commands:
Router#
show hccp interface cable 4/0
Cable4/0 - Group 1 Protect, enabled, blocking
authentication md5, key-chain "cisco1"
hello time 2000 msec, hold time 6000 msec
Member 1 standby
ip addr: working 10.20.111.11, protect 10.20.111.10
downstream wavecom (1.1.11.3/1, 1.1.11.3/2), upstream none
Router#
show hccp interface cable 4/0 brief
Interface Config Grp Mbr Status
Ca4/0 Protect 1 1 standby
Router#
interface
The cable interface for which you want to display HCCP group information.
The information presented includes HCCP groups, configuration types,
member numbers, status, authentication algorithms, authentication key
chains, HCCP timers, Ip address assignments, and downstream switch
designations for the specified cable interface.
brief
(Option) Displays a brief summary of the HCCP groups, configuration
types, member numbers, and status for a specified cable interface.
detail
(Option) Displays a detailed summary of the HCCP groups, configuration
types, member numbers, and status for a specified cable interface.
Release
Modification
12.1(3a)EC
This command was introduced.
12.2(4)BC1 The
detail
option was added.
12.2(8)BC2
The current time to resync and current wait to restore was added to the
brief
option.
12.2(11)BC1
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router and Cisco uBR-MC16C, Cisco uBR-MC16S,
and Cisco uBR-MC28C cards.